Showing posts with label whale. Show all posts
Showing posts with label whale. Show all posts
Sunday, June 19, 2011

I fear buttonholes no more! (or Zboy's new whale shorts)



Be warned, this post has a lot of pics. I wanted to explain what I was doing as I did it.

To go with the shirred whale print dress I made for Zgirl, I sewed up a pair of shorts with cargo pockets and matching T for Zboy.

I've never really done pockets before, and as you may have noticed, I had a huge hate for buttonholes. My old machine was a 4 step process, and it always looked terrible. With my new machine and it's 1 step automatic buttonhole, be prepared to see lots of buttons coming!

I again followed my altered version of the basic pants/shorts pattern found here. I sewed the crotch seam together, and then the outer leg seam. I figured this would be the easiest way to add pockets. Measure the size of pocket you want, then iron under the raw edges. I should have serged them first, but I didn't. Now is the time to add a button if you want to sew it on with your machine. Mark the spot for the pocket, making sure both sides match. Topstitch the sides and bottom (I used a contrasting thread to add interest).
Then you want to measure for your flap. You want it to extend a little beyond each side of the pocket. Sew the short sides and one long side, leaving the other open. Trim the corners. Turn, and use a crochet hook or something to push the corners out. Iron it carefully. It should look something like this.


Then, if you want, topstitch the flap, leaving the unsewn side still open.




If you want a buttonhole, now is a good time to add it! Lay it with the side you want on top against the right side of the fabric. Match it up with the pocket and sew a straight line across.


Iron it down carefully, folding it over where you have sewn. Then, topstitch. This isn't necessary, but it helps keep the fold in place.



Then, sew the inner leg seam together, and follow the rest of the tutorial for adding elastic. Cute cargo pockets (with buttonhole! and handsewn buttons, because I forgot that step) on a cute pair of shorts.


Friday, June 17, 2011

Fussy cut applique

How to do a fussy cut applique
(onto a knit fabric)
Cut out your piece, and apply some fusible webbing (like wonder under). I left a tiny bit of white around. You can do this, or just cut it out completely. Iron onto your fabric. I was aiming for a logo type look (like Le Tigre)

Tip #1-When appliqueing onto a knit fabric, put interfacing on the back of it! I forgot this all important step, and ended up with a satin stitch mess that took forever to rip out. You could also use tear away stabilizer, or a piece of tracing/tissue paper underneath. I ended up using some lightweight interfacing and tracing paper.


Tip #2-Practice on a scrap piece first so you can figure out where you want your stitches to lay. I got halfway through and realized, hey, this would look so much better here-so again, I had to rip out a bunch of stitches.

It's still not perfect, but this is a pretty small piece to work with. I added the spout detail with the triple stitch on my machine. It didn't work as well as I hoped on the stretchy knit, but you don't notice unless it's close up like this picture!
 

Blog Template by YummyLolly.com